100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

Pipe repair bandage is an extremely convenient and effective product for the emergency repair of less severe pipe leaks on steel,HDPE, rubber hoses, ventilation ducts, plastic both underground and surface application. Quick and simple to use with no mixing or measuring required. A successful pipe repair can be achieved in only 30 minutes.

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

Resin Makeup Water-activated Polyurethane
Heat Resistance 150°C (300°F)
Pressure Resistance Internal Pressure up to 15Mpa (5075psi)
Bonds to Most Pipes
  • Steel
  • Polypipe
  • PVC
  • Fibreglass
  • Copper
Set Time 20 – 30 minutes, sets under water
Chemical, Fuel and Oil Resistant
  • Acid lines
  • Oils
  • Gas
  • Sea water
  • MDISC

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

For Pipe Repair Bandage,normal size as below: ( The length can be produced as your need) product on ecer

NO. Specification Carton Size cm Packing

UT002

(2inch)

5.0×360 cm/roll 60x40x41 1roll/bag, 10bags/box, 12boxes/ctn

UT003

(3inch)

7.5x360cm/roll 60x40x41 1roll/bag, 10bags/box, 12boxes/ctn

UT004

(4inch)

10.0x360cm/roll 60x40x41 1roll/bag, 10bags/box, 12boxes/ctn

UT005

(5inch)

12.5x360cm/roll 60x40x41 1roll/bag, 10bags/box, 9boxes/ctn

UT006

(6inch)

15.0x360cm/roll 60x40x41 1roll/bag, 10bags/box, 9boxes/ctn

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape

* Clean and roughen the damaged area with the metal file or wire brush, which will help resulting a more successful repair.

*Knead Steel Putty and apply firmly into damaged area. Putty has a 2-5 minute work time, and the bandage application must begin during this time.
* Put gloves on,Soak bandage in fresh water for 10 seconds. Squeeze bandage 1-2 times while in water to help activation.
* Squeeze out the access water, apply the bandage spirally around the damaged pipe area. Extending up to 50mm (2″)either side of the leaked area.
* With wet gloves, squeeze the bandage with a rotating motion until resin stops foaming and is set.

Bond in 30 minutes Pipe Repair Bandage
Tips: To achieve the best result,the bandage should be more than 10mm thick (10-15 layers). Allow 30 minutes for bandage to set rock-hard.

Unique-Technology will initiate the second phase of our development strategy. Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.

Contact: Mandy

Phone: +86 131 7522 3541

Tel: +86-574-85288851
Fax: +86-574-85567233

Address: 21F, Zimao District ,Ningbo China,PRC

https://www.unique-technology.com/

100mm 4.6m Black Pipe Wrap Repair Bandage Fix It Wrap Fiberglass Seal Tape